Grim Reaper Completed
She was actually sorta done last Friday... almost. I had some trouble attaching the head since there is quite a bit of resin attached to the head such as her cape/cowl. I originally used a magnet to hold the head…
Grim Reaper Part 3
Seven months after my last post on the subject; it is time to get around to finishing the damn project. So let us catch up. Here is a mockup of Death right about the end of March as I continued…
Grim Reaper Part 2
Last time we left off, I was cleaning up the last bits of the kit with the scythe and the clear pieces. I have no idea why some of these pieces are clear such as the tassels since they’re going to be painted solid colors. I can understand the hair being clear, some translucent painting will come into play here. But these clear parts makes for some different approaches to clean up and filling. The resin is different, so sanding properties are slightly off in comparison to the regular resin. But once cleaned up, they go in for a soak in the industrial strength cleaner then a scrub in the ultrasonic cleaner and then dried.
After drying, the parts are ready for priming. The scythe parts are primed with regular Mr Color Surfacer Primer. The clear pieces are primed with clear gloss. The gloss fills in the tiny little scratches left over from the sanding process and when done, the part is crystal clear. There are a bunch of different methods for this such as dipping the parts into an acrylic clear medium or other products. I have a good amount of lacquer based clear gloss, so I used that.
More after the jump. (more…)
New resin figure project: Grim Reaper
Towards the end of the Mercedes build, this kit arrived. The sculptor calls her æ»ç¥žã®ãƒ‡ã‚¹ä»£ or just “Death/God of Death”, I prefer the less final name of Grim Reaper. I picked her up off yahoo!japan auctions right after Winter Wonfest 2018. Unknown to me was that the sculptor: https://twitter.com/chilmirumirumi was already planning on releasing the kit to folks outside Japan through her webshop: http://artfiguegk.theshop.jp/. Yesterday there was a twitter update with two release times: March 17 @ 22:00 Japan time and March 18, 2018 @ 15:00 Japan Time. So for those interested in this kit, keep a watch on her webstore at these times to get it. Her kits sell out, and I don’t think she does multiple runs; so if you want it, get it now. Build her later if you want. I wanted to build her now, so I started a few weeks ago.
The nice thing about resin figure kits are the parts count. The down side to a low parts count is a decent amount of masking when getting around to the painting. The cleanup work is also a sizeable chunk of work. The first thing I usually do is pin together the major parts. The smaller bits are left off so I can get a general idea of what the kit looks like and what I need to do to approach the build. A visual really helps. Plus, pinning is one of the fun things about resin kits, you get a sneak peek into the end of the project.
Turnarounds done, the real work starts after the jump. (more…)