Today is our annual competition presented by Those Gundam Guys. The Southern California Gundam Model Competition. This year we're going to try adding something new to the mix. We're going to attempt to live broadcast this insanity. So bear with…
"On the 12th day until SCGMC, the folks at TGG give to you; a sneak peak at the raffle prizes!" Ok, so I'm not really going to post every bloody day with a new lyric counting down until SCGMC; or…
It’s now one month away from SCGMC 2015! We are very excited because it’s our 5th year, we have a huge new venue, AND there’s the 1/144 city diorama theme. It will be damn cool to see all the dioramas put together to create one giant 1/144 city. We’ve got Feddy and Zeon shirts for sale on this site for the past several months but as an added special only available at this year’s SCGMC, we added a new shirt that is Char themed. The red Char shirt will ONLY be available at SCGMC 2015 and we only have a limited number of these shirts. During our bi-weekly broadcast, the guys teased that we would announce something special for SCGMC this year, and one of the comments screamed something to the effect of, “Great, now TGG is going to do a P-TGG thing”. The price for the Char’s shirt is going to be the same as the Feddy and Zeon shirts. But again, there will be limited numbers and only available at the show. We have sizes from Small through 2XL.
This is a quick little discussion about clear parts. Beam sabers, lenses, etc. They come on runners and when clipped, they still have nubs and mold lines; and some even have horrible mold marks. The MG Gouf 2.0 sword has circular mold marks in the clear yellow blade. First we’ll discuss the mold lines and nub marks. When these are sanded to remove them, the clear part becomes cloudy. The sanding process puts tiny scratches into the clear part which end up refracting light causing the part to look cloudy.
The fix for this is to continue sanding. Starting at a low grit the clear the mold line or nub. Then continue with higher and higher grits to effectively polish the part. I usually go up to about 600 grit with the polishing and the surface feels smooth to the touch. Meaning, when I run a fingernail across, I don’t feel the small scratches that are still in the surface of the parts. The part will look less cloudy with the higher grit polishing; but not completely clear. To get the part completely clear, a clear gloss is sprayed. The clear gloss works like a primer, the clear paint fills in the tiny scratches and makes the part completely clear. If the part is still cloudy, let the part cure, then polish again with higher grit and spray another gloss layer.
