This year’s resin figure build: Revy

Several weeks ago, it occurred to me that I had yet to build a resin figure this year. I’ve been building fewer projects over the course of a year, but so far I’ve completed the resin conversion Efreet Custom and my little Nu project. Yes, the Efreet is mostly resin, but it is definitely not a figure kit; so picking through my pile, I narrowed down a few during the August build gathering. The Dutch and Revy kit pulled to me, and looking at the quick fit of things, I decided on the Revy which looks like it’s about a 1/4 scale bust kit.

So we begin, with Step 1: Basic building and pinning. I actually quite enjoy this step, the rough excess resin tabs are cut and the kit comes together in unpainted resin pureness. One of the build guys, Manuel, lent me his jeweler’s saw, which cuts through the resin like butter, and reduces the chance of resin chipping from using clippers. However, there is a real possibility of slipping and cutting into the resin parts other than just the excess resin, so care needs to be taken – especially since these saws can take off skin and bone just as easily.

Excess resin is removed here and there while the parts are test fitted, making sure parts are snug and aligned. Once this is done, some of the parts are carefully pinned trying to keep true to the alignment. Here I can see what pieces need reshaping or realignment.

(more…)

Continue ReadingThis year’s resin figure build: Revy