2017 | Gamera Baenre's Mindless Ramblings

Saber Commission: Washes and Pearls

Post author:GameraBaenre
Post published:September 26, 2017
Post category:Model Building
Post comments:0 Comments

Getting down to the home stretch for this project. This weekend saw work on the base. The base is from Michaels and is unfinished wood. An example of what the wood looks like in comparison to the finished base is the first picture. The unfinished wood is sanded down. Once sanded down, it is stained with an ebony stain. Allowing that to dry, the base is sprayed with several layers of clear gloss. After several layers, the final layer is sanded down with high grit sanding pad to smooth out all the rough edges frozen in the cured clear gloss. A final clear gloss leaves the base in a ultra smooth glossy finish.

Most of the parts are curing after final detail painting and have been sprayed with clear gloss on some pieces to prepare those parts for detail washes. The other pieces are sprayed a final clear flat to finish them.

More after the jump.

(more…)

Quick Progress for the Saber Commission Project

Post author:GameraBaenre
Post published:September 21, 2017
Post category:Model Building
Post comments:0 Comments

A quick little update for this project. I've been spending time masking off the purple that was painted. After masking, the detail lines and straps are painted in black. I use mostly tamiya masking tape. Some areas are masked off…

Saber Bride Commission Project

Post author:GameraBaenre
Post published:August 28, 2017
Post category:Model Building
Post comments:0 Comments

This has been a long while since I have had enough material to make a post. I’ve been slowly progressing with the kit over the past 6 to 7 weeks. I haven’t really had much time to get a good foothold on the project, but this weekend fixed that. I had finished a release at work and the wife was busy with other commitments; which left me to my own devices. And those devices gets the resin sanded and painted.

Here is a quick little catch up from when I first started on the project. I had gotten it pinned and test fitted. Next, I took it apart and did some initial sanding to remove most of the visible nubs, mold lines, and resin boogers. After that initial sanding, the whole kit is dropped into some industrial strength cleaning fluid for at least the night to a few days. This makes sure that any residual mold release is dissolved. The mold release agents are made to keep things from sticking to the resin, and paint is one of those things that the agent will keep from playing nicely.

(more…)

Anime Expo 2017 and a new commission project

Post author:GameraBaenre
Post published:July 11, 2017
Post category:Model Building
Post comments:0 Comments

Anime expo has come and gone and I’m finally getting around to uploading the pictures I took from the two days I went and writing a little bit about the event. This was a great year for gunpla. Katsumi Kawaguchi came out to AX and along with a panel of Bandai folks did the judging at the AX leg of the GBWC USA Regions. That was pretty cool. They hosted a few Gundam and Gunpla panels. We also hosted our usual Gunpla building panels for all ages and the infamous 18+ panel as well. There was a new group that had a booth at AX this year. A group called Simp, and from our chatting with the folks there, they are a group that builds commission gunpla models and have started their own shop as well as selling some GK gunpla kits too. They had a pretty impressive display of built kits at the booth. Speaking of commissions, I had promised a guy that contacted me that I would start working on his figure commission in July (after I was done with AX and the GM Sniper project). So now that that’s done, the kit arrived today and I started to get cracking on it. The customer has some specific ideas so hopefully I can build to his expectations.

More about AX, our panels, AX GBWC, and the Saber commission after the jump!

(more…)

S	M	T	W	T	F	S
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30	31