Gouf Custom ver Exceed a 2B and a Commission Project

I haven’t posted an update in a long while since I’ve been extremely lazy in the past few weeks. I’ve been suckered into playing GBGW (Gunpla Battle: Gunpla Warfare) on my damn phone. *cough*E4AKNYNR6*cough*. But that has slowed down because energy recovery at higher levels takes some time, and I’m not giving Bandai any more money than I already give them.

Back to working on the Gouf Custom project as well as adding 2 other projects to the workbench. Well, sort of. Model building can wear you down or the motivation just wanes. Or sometimes, something shiny and new comes along and takes up all your attention – not talking about the stupid gunpla mobile game. The two other project are a recent development. The first side project is a commission figure kit build of a Volks 1/7 scale Sakurai Aoi from Rail Wars. I have until the end of the year and it is a fairly straight-forward build so I did a quick test fit assembly of the major pieces and snapped some pictures. The next project is from a 3D file posted online: of 2B from Nier Automata. I scaled her down to about 1/5.5 scale and printed the 5 parts in the Form 2. Here’s the comparison with the Sakurai and 2B side by side.

After the jump, I’ll get back into the Gouf Custom starting from where I last left off. (more…)

Continue ReadingGouf Custom ver Exceed a 2B and a Commission Project

Zaku Exceed Head Conversion to No Zaku Boy Custom Bust

The old adage that if you don’t use it, you’ll lose it; is very true. I did some 3D designs for the Dom Barrage project but once those pieces were designed and printed and I spent more time with the hands-on side of things to finish the build; the 3D design skills flew out the door. Since the Dom project was fairly intense, I wanted to relax a bit and work on something simple like the Zaku Exceed head. I finished the Gundam Exceed head while in the middle of working on the Dom project as a quick break. But as I started looking at the Zaku heads and thinking more, I realized that I should keep practice on the 3D design. I needed to relearn a few things but it is kind alike riding a bike, once you get used to the balance and everything, it just becomes muscle memory. So my quick and simple project kinda blew up into a full blown custom project….converting the Zaku Exceed head into a Gouf Custom head with a full bust.

I’m getting much more comfortable with the design, but I’m still VERY novice at it so the end result isn’t the greatest in terms of properly designed 3D files. This first set of pictures are the initial build progression via Blender. The basic idea is to block out the design using reference pictures I took from the NeoGrade Gouf Custom Conversion kit I built years ago. Once the blocks are laid out, details and shaping can be done.

Read more about the project after the jump!

(more…)

Continue ReadingZaku Exceed Head Conversion to No Zaku Boy Custom Bust

Shirt Reprints!

SCGMC Shirt reprints! We just received our reprints for the Alex Build, Kampfer, and Gunpla Elitist! Folks have been requesting these shirts so here they are! We did a different print style for the Alex Build using ink discharge printing,…

Continue ReadingShirt Reprints!

Dom Barrage, last progress post and it’s DONE!

As promised, there were only a few last steps for this project. The kit has been broken down into major subsections. Some subsections bigger than others. And I start off with applying some paint chipping using an enamel based metallic grey. A very small brush is used and I just slowly and carefully apply some chips here and there. I don’t want to go overboard, I just want to see that the suit has seen “some” use.

The rest of the final weathering steps as well as the final pictures for the kit after the jump.
(more…)

Continue ReadingDom Barrage, last progress post and it’s DONE!