{"id":922,"date":"2009-11-11T11:06:40","date_gmt":"2009-11-11T19:06:40","guid":{"rendered":"http:\/\/gamerabaenre.com\/?p=922"},"modified":"2009-11-11T11:12:56","modified_gmt":"2009-11-11T19:12:56","slug":"sniper-progress-rifle-work-decals-light-up-saber","status":"publish","type":"post","link":"https:\/\/gamerabaenre.com\/?p=922","title":{"rendered":"Sniper Progress: Rifle work, decals, light up saber"},"content":{"rendered":"<p>Update from the weekend and the past few days.  First will be work on the main sniper rifle.  I still need to get down and finish up the work on the other weapons.  There quite a bit of down time while working on the kit as each layer needs a protective clear coat to sandwich each successive step.  The process is fairly tedious, but in the long run, saves rework when mistakes are made or issues of incompatible products cause problems.  The process is the following:<br \/>\nPaint cured<br \/>\n&#8211; clear gloss is sprayed<br \/>\n&#8211; decals<br \/>\n&#8211; clear gloss<br \/>\n&#8211; panel lines<br \/>\n&#8211; clear gloss<br \/>\n&#8211; paint chipping<br \/>\n&#8211; clear gloss<br \/>\n&#8211; filter\/fade<br \/>\n&#8211; clear flat<br \/>\n&#8211; pastel weathering<br \/>\n&#8211; final clear flat<\/p>\n<p>Allowing each clear coat to cure over night, the quickest I could complete the kit at this point would be about a week.  Down time between curing sessions will allow me to work on the gun and hopefully finish everything some time next week.<\/p>\n<p style=\"text-align: center\"><a rel=\"lightbox[2]\" href=\"http:\/\/gamerabaenre.com\/images\/sniper_conversion 114_jpg.jpg\"><img decoding=\"async\" src=\"http:\/\/gamerabaenre.com\/thumbnails\/sniper_conversion 114_jpg.jpg\"><\/a> <a rel=\"lightbox[2]\" href=\"http:\/\/gamerabaenre.com\/images\/sniper_conversion 139_jpg.jpg\"><img decoding=\"async\" src=\"http:\/\/gamerabaenre.com\/thumbnails\/sniper_conversion 139_jpg.jpg\"><\/a>   <a rel=\"lightbox[2]\" href=\"http:\/\/gamerabaenre.com\/images\/sniper_conversion 149_jpg.jpg\"><img decoding=\"async\" src=\"http:\/\/gamerabaenre.com\/thumbnails\/sniper_conversion 149_jpg.jpg\"><\/a><\/p>\n<p><!--more--><\/p>\n<p>The silencer build:  Little dents in a lattice pattern are added to the tip of the silencer.  This was done with masking tape guide much like how the holes were drilled, then the dents were done with a drill bit carefully carving the dents into the plastic.  A piece of styrene tubing was cut and placed over the silencer as a detail piece then sanded down to match profile and scale.  The tip of the silencer used varying sizes of brass and aluminum tubes to center the inner barrel.  Light curing putty is pasted over this and then sanded down. <\/p>\n<p style=\"text-align: center\"><a rel=\"lightbox[2]\" href=\"http:\/\/gamerabaenre.com\/images\/sniper_conversion 115_jpg.jpg\"><img decoding=\"async\" src=\"http:\/\/gamerabaenre.com\/thumbnails\/sniper_conversion 115_jpg.jpg\"><\/a><\/p>\n<p>After priming the weapon show look a little more solid in terms of cohesion of parts.  There are some rough spots that will need attention, but for all intents and purposes, the rifle is coming along together fairly nicely.  It now looks like a rifle as opposed to some franken weapon pieced together from spare parts.<\/p>\n<p style=\"text-align: center\"><a rel=\"lightbox[2]\" href=\"http:\/\/gamerabaenre.com\/images\/sniper_conversion 121_jpg.jpg\"><img decoding=\"async\" src=\"http:\/\/gamerabaenre.com\/thumbnails\/sniper_conversion 121_jpg.jpg\"><\/a> <a rel=\"lightbox[2]\" href=\"http:\/\/gamerabaenre.com\/images\/sniper_conversion 120_jpg.jpg\"><img decoding=\"async\" src=\"http:\/\/gamerabaenre.com\/thumbnails\/sniper_conversion 120_jpg.jpg\"><\/a><\/p>\n<p>Light up beam saber.  Parts are fairly simple, holder for two batteries, a small led, and the end cap.  A quick twist and the led contacts touch the battery lighting up the led.  Placing a beam saber part into the hilt we get a light saber.  <\/p>\n<p style=\"text-align: center\"><a rel=\"lightbox[2]\" href=\"http:\/\/gamerabaenre.com\/images\/sniper_conversion 142_jpg.jpg\"><img decoding=\"async\" src=\"http:\/\/gamerabaenre.com\/thumbnails\/sniper_conversion 142_jpg.jpg\"><\/a> <a rel=\"lightbox[2]\" href=\"http:\/\/gamerabaenre.com\/images\/sniper_conversion 123_jpg.jpg\"><img decoding=\"async\" src=\"http:\/\/gamerabaenre.com\/thumbnails\/sniper_conversion 123_jpg.jpg\"><\/a>  <a rel=\"lightbox[2]\" href=\"http:\/\/gamerabaenre.com\/images\/sniper_conversion 122_jpg.jpg\"><img decoding=\"async\" src=\"http:\/\/gamerabaenre.com\/thumbnails\/sniper_conversion 122_jpg.jpg\"><\/a> <a rel=\"lightbox[2]\" href=\"http:\/\/gamerabaenre.com\/images\/sniper_conversion 126_jpg.jpg\"><img decoding=\"async\" src=\"http:\/\/gamerabaenre.com\/thumbnails\/sniper_conversion 126_jpg.jpg\"><\/a><\/p>\n<p>Quick mock up of the sucker with full weapons load.  <\/p>\n<p style=\"text-align: center\"><a rel=\"lightbox[2]\" href=\"http:\/\/gamerabaenre.com\/images\/sniper_conversion 133_jpg.jpg\"><img decoding=\"async\" src=\"http:\/\/gamerabaenre.com\/thumbnails\/sniper_conversion 133_jpg.jpg\"><\/a> <a rel=\"lightbox[2]\" href=\"http:\/\/gamerabaenre.com\/images\/sniper_conversion 128_jpg.jpg\"><img decoding=\"async\" src=\"http:\/\/gamerabaenre.com\/thumbnails\/sniper_conversion 128_jpg.jpg\"><\/a>  <a rel=\"lightbox[2]\" href=\"http:\/\/gamerabaenre.com\/images\/sniper_conversion 132_jpg.jpg\"><img decoding=\"async\" src=\"http:\/\/gamerabaenre.com\/thumbnails\/sniper_conversion 132_jpg.jpg\"><\/a> <a rel=\"lightbox[2]\" href=\"http:\/\/gamerabaenre.com\/images\/sniper_conversion 139_jpg.jpg\"><img decoding=\"async\" src=\"http:\/\/gamerabaenre.com\/thumbnails\/sniper_conversion 139_jpg.jpg\"><\/a><\/p>\n<p>I felt that the sabers coming out of the forearms were a tad bit on the long side, so the solution is to cut and sand down the sabers to reshape them. Sanding clear pieces gives a very cloudy finish, even when polished with a very high grit sanding pad. So to fix the clarity issue, the finely sanded sabers are clear coated and the clear coat fills in all the small scratches and the part becomes clear once again.<\/p>\n<p style=\"text-align: center\"><a rel=\"lightbox[2]\" href=\"http:\/\/gamerabaenre.com\/images\/sniper_conversion 144_jpg.jpg\"><img decoding=\"async\" src=\"http:\/\/gamerabaenre.com\/thumbnails\/sniper_conversion 144_jpg.jpg\"><\/a> <a rel=\"lightbox[2]\" href=\"http:\/\/gamerabaenre.com\/images\/sniper_conversion 160_jpg.jpg\"><img decoding=\"async\" src=\"http:\/\/gamerabaenre.com\/thumbnails\/sniper_conversion 160_jpg.jpg\"><\/a><\/p>\n<p>All the parts get a clear coat to prepare the surface for decals. Water slide decals stick best to a glossy surface. This also minimizes on the potential silvering where the edges of the decal lift or the decal itself lifts up. The clear coat also protects the paint from any decal softening or setting solutions used to help melt the decals onto the surface.<\/p>\n<p style=\"text-align: center\"><a rel=\"lightbox[2]\" href=\"http:\/\/gamerabaenre.com\/images\/sniper_conversion 145_jpg.jpg\"><img decoding=\"async\" src=\"http:\/\/gamerabaenre.com\/thumbnails\/sniper_conversion 145_jpg.jpg\"><\/a>  <a rel=\"lightbox[2]\" href=\"http:\/\/gamerabaenre.com\/images\/sniper_conversion 146_jpg.jpg\"><img decoding=\"async\" src=\"http:\/\/gamerabaenre.com\/thumbnails\/sniper_conversion 146_jpg.jpg\"><\/a> <a rel=\"lightbox[2]\" href=\"http:\/\/gamerabaenre.com\/images\/sniper_conversion 147_jpg.jpg\"><img decoding=\"async\" src=\"http:\/\/gamerabaenre.com\/thumbnails\/sniper_conversion 147_jpg.jpg\"><\/a><\/p>\n<p>After curing for a full day, the decals were applied the previous day and micro sol decal setting solution was used to help soften and set the decals to the surface. After a full day of curing, the decals are weathered with a hobby knife and a 150 grit sanding pad lightly rubbed against the surface of the decal. The clear gloss that the decal layers sits on also help protect the paint layer from the decal weathering stage.<\/p>\n<p style=\"text-align: center\"><a rel=\"lightbox[2]\" href=\"http:\/\/gamerabaenre.com\/images\/sniper_conversion 149_jpg.jpg\"><img decoding=\"async\" src=\"http:\/\/gamerabaenre.com\/thumbnails\/sniper_conversion 149_jpg.jpg\"><\/a>  <a rel=\"lightbox[2]\" href=\"http:\/\/gamerabaenre.com\/images\/sniper_conversion 154_jpg.jpg\"><img decoding=\"async\" src=\"http:\/\/gamerabaenre.com\/thumbnails\/sniper_conversion 154_jpg.jpg\"><\/a> <a rel=\"lightbox[2]\" href=\"http:\/\/gamerabaenre.com\/images\/sniper_conversion 151_jpg.jpg\"><img decoding=\"async\" src=\"http:\/\/gamerabaenre.com\/thumbnails\/sniper_conversion 151_jpg.jpg\"><\/a> <a rel=\"lightbox[2]\" href=\"http:\/\/gamerabaenre.com\/images\/sniper_conversion 155_jpg.jpg\"><img decoding=\"async\" src=\"http:\/\/gamerabaenre.com\/thumbnails\/sniper_conversion 155_jpg.jpg\"><\/a><\/p>\n<p>Once the decal weathering is completed, the decals are sealed in with another layer of clear gloss that effectively sandwiches the decals between two layers of gloss. The decals need to be protected from the next stage which will be the panel lines. The ink on the decals may be damaged by lighter fluid or enamel thinner from the wash process so a protective clear gloss layer will help preserve the decal.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Update from the weekend and the past few days. First will be work on the main sniper rifle. I still need to get down and finish up the work on the other weapons. There quite a bit of down time while working on the kit as each layer needs a protective clear coat to sandwich [&hellip;]<\/p>\n","protected":false},"author":222,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_exactmetrics_skip_tracking":false,"_exactmetrics_sitenote_active":false,"_exactmetrics_sitenote_note":"","_exactmetrics_sitenote_category":0,"ocean_post_layout":"","ocean_both_sidebars_style":"","ocean_both_sidebars_content_width":0,"ocean_both_sidebars_sidebars_width":0,"ocean_sidebar":"","ocean_second_sidebar":"","ocean_disable_margins":"enable","ocean_add_body_class":"","ocean_shortcode_before_top_bar":"","ocean_shortcode_after_top_bar":"","ocean_shortcode_before_header":"","ocean_shortcode_after_header":"","ocean_has_shortcode":"","ocean_shortcode_after_title":"","ocean_shortcode_before_footer_widgets":"","ocean_shortcode_after_footer_widgets":"","ocean_shortcode_before_footer_bottom":"","ocean_shortcode_after_footer_bottom":"","ocean_display_top_bar":"default","ocean_display_header":"default","ocean_header_style":"","ocean_center_header_left_menu":"","ocean_custom_header_template":"","ocean_custom_logo":0,"ocean_custom_retina_logo":0,"ocean_custom_logo_max_width":0,"ocean_custom_logo_tablet_max_width":0,"ocean_custom_logo_mobile_max_width":0,"ocean_custom_logo_max_height":0,"ocean_custom_logo_tablet_max_height":0,"ocean_custom_logo_mobile_max_height":0,"ocean_header_custom_menu":"","ocean_menu_typo_font_family":"","ocean_menu_typo_font_subset":"","ocean_menu_typo_font_size":0,"ocean_menu_typo_font_size_tablet":0,"ocean_menu_typo_font_size_mobile":0,"ocean_menu_typo_font_size_unit":"px","ocean_menu_typo_font_weight":"","ocean_menu_typo_font_weight_tablet":"","ocean_menu_typo_font_weight_mobile":"","ocean_menu_typo_transform":"","ocean_menu_typo_transform_tablet":"","ocean_menu_typo_transform_mobile":"","ocean_menu_typo_line_height":0,"ocean_menu_typo_line_height_tablet":0,"ocean_menu_typo_line_height_mobile":0,"ocean_menu_typo_line_height_unit":"","ocean_menu_typo_spacing":0,"ocean_menu_typo_spacing_tablet":0,"ocean_menu_typo_spacing_mobile":0,"ocean_menu_typo_spacing_unit":"","ocean_menu_link_color":"","ocean_menu_link_color_hover":"","ocean_menu_link_color_active":"","ocean_menu_link_background":"","ocean_menu_link_hover_background":"","ocean_menu_link_active_background":"","ocean_menu_social_links_bg":"","ocean_menu_social_hover_links_bg":"","ocean_menu_social_links_color":"","ocean_menu_social_hover_links_color":"","ocean_disable_title":"default","ocean_disable_heading":"default","ocean_post_title":"","ocean_post_subheading":"","ocean_post_title_style":"","ocean_post_title_background_color":"","ocean_post_title_background":0,"ocean_post_title_bg_image_position":"","ocean_post_title_bg_image_attachment":"","ocean_post_title_bg_image_repeat":"","ocean_post_title_bg_image_size":"","ocean_post_title_height":0,"ocean_post_title_bg_overlay":0.5,"ocean_post_title_bg_overlay_color":"","ocean_disable_breadcrumbs":"default","ocean_breadcrumbs_color":"","ocean_breadcrumbs_separator_color":"","ocean_breadcrumbs_links_color":"","ocean_breadcrumbs_links_hover_color":"","ocean_display_footer_widgets":"default","ocean_display_footer_bottom":"default","ocean_custom_footer_template":"","jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"ocean_post_oembed":"","ocean_post_self_hosted_media":"","ocean_post_video_embed":"","ocean_link_format":"","ocean_link_format_target":"self","ocean_quote_format":"","ocean_quote_format_link":"post","ocean_gallery_link_images":"on","ocean_gallery_id":[],"footnotes":""},"categories":[12],"tags":[584,71,573,26,583,576],"class_list":["post-922","post","type-post","status-publish","format-standard","hentry","category-gundam-models","tag-decal-weathering","tag-decals","tag-gm-sniper-custom","tag-gunpla","tag-scratch-building-rifle","tag-scratch-built-rifle","entry","owp-thumbs-layout-horizontal","owp-btn-normal","owp-tabs-layout-horizontal","has-no-thumbnails","has-product-nav"],"aioseo_notices":[],"jetpack_featured_media_url":"","jetpack_shortlink":"https:\/\/wp.me\/p7qf6-eS","jetpack_sharing_enabled":true,"jetpack_likes_enabled":true,"_links":{"self":[{"href":"https:\/\/gamerabaenre.com\/index.php?rest_route=\/wp\/v2\/posts\/922","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/gamerabaenre.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/gamerabaenre.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/gamerabaenre.com\/index.php?rest_route=\/wp\/v2\/users\/222"}],"replies":[{"embeddable":true,"href":"https:\/\/gamerabaenre.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=922"}],"version-history":[{"count":0,"href":"https:\/\/gamerabaenre.com\/index.php?rest_route=\/wp\/v2\/posts\/922\/revisions"}],"wp:attachment":[{"href":"https:\/\/gamerabaenre.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=922"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/gamerabaenre.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=922"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/gamerabaenre.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=922"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}