{"id":3807,"date":"2015-07-01T22:26:26","date_gmt":"2015-07-02T05:26:26","guid":{"rendered":"http:\/\/gamerabaenre.com\/?p=3807"},"modified":"2015-07-01T22:26:26","modified_gmt":"2015-07-02T05:26:26","slug":"operation-sucker-punch","status":"publish","type":"post","link":"https:\/\/gamerabaenre.com\/?p=3807","title":{"rendered":"Operation Sucker Punch!"},"content":{"rendered":"

Taking some time off work really paid off; as if I didn’t, I wouldn’t have been able to finish the project within the confines of the AX deadline. Well, I think I could have, but it would have really been pushing things. From the last update, I started attaching the completed pieces of the project to the base. The silos and pipe works were glued onto the base. The tower light was attached and glued into position. The one building was also glued onto the base. Once these pieces were in place, I taped off some border areas and using some elmer’s white glue thinned down slightly with water; painted the watered down glue and then carefully sprinkled some colored ballasts (model train store scenics stuff) The stuff is great for replicating gravel and comes in a variety of colors. The damaged base area was painted with the diluted white glue and more gravel was applied. Once the glue completely dries; a few hours as the stuff dries pretty quickly (I let it sit for at least 8 hours as I’m paranoid). I did an enamel wash with a few colors to give a some dimension to the gravel. I also dropped in some more diluted white glue and added some yellow turf as a weedy undergrowth. <\/p>\n

<\/a> <\/a> <\/a><\/p>\n

<\/p>\n

With the resin cured, I used some water effects from Woodland Scenics (which is basically a repackaged clear gloss medium – a clear gesso), and using a wood tongue depressor, created some waves to get the effect of the Zulu rising out of the water and making all sorts of splashes. This stuff takes a long time to cure. Longer if the application is thicker. So the thinner areas cured up relatively fast and goes completely clear. The bigger waves stayed white for a while.<\/p>\n

<\/a><\/p>\n

The sides of the base needed some attention, so I did a quick stain for the balsa wood with a paper towel, then sealed it all up after it cured with a semi gloss clear finish.<\/p>\n

<\/a><\/p>\n

During this week’s Those Gundam Guys Live (towards the end of the video):<\/p>\n