Mar 272018
 

Last time we left off, I was cleaning up the last bits of the kit with the scythe and the clear pieces. I have no idea why some of these pieces are clear such as the tassels since they’re going to be painted solid colors. I can understand the hair being clear, some translucent painting will come into play here. But these clear parts makes for some different approaches to clean up and filling. The resin is different, so sanding properties are slightly off in comparison to the regular resin. But once cleaned up, they go in for a soak in the industrial strength cleaner then a scrub in the ultrasonic cleaner and then dried.

After drying, the parts are ready for priming. The scythe parts are primed with regular Mr Color Surfacer Primer. The clear pieces are primed with clear gloss. The gloss fills in the tiny little scratches left over from the sanding process and when done, the part is crystal clear. There are a bunch of different methods for this such as dipping the parts into an acrylic clear medium or other products. I have a good amount of lacquer based clear gloss, so I used that.

More after the jump. Continue reading »

Mar 152018
 

Towards the end of the Mercedes build, this kit arrived. The sculptor calls her 死神のデス代 or just “Death/God of Death”, I prefer the less final name of Grim Reaper. I picked her up off yahoo!japan auctions right after Winter Wonfest 2018. Unknown to me was that the sculptor: https://twitter.com/chilmirumirumi was already planning on releasing the kit to folks outside Japan through her webshop: http://artfiguegk.theshop.jp/. Yesterday there was a twitter update with two release times: March 17 @ 22:00 Japan time and March 18, 2018 @ 15:00 Japan Time. So for those interested in this kit, keep a watch on her webstore at these times to get it. Her kits sell out, and I don’t think she does multiple runs; so if you want it, get it now. Build her later if you want. I wanted to build her now, so I started a few weeks ago.

The nice thing about resin figure kits are the parts count. The down side to a low parts count is a decent amount of masking when getting around to the painting. The cleanup work is also a sizeable chunk of work. The first thing I usually do is pin together the major parts. The smaller bits are left off so I can get a general idea of what the kit looks like and what I need to do to approach the build. A visual really helps. Plus, pinning is one of the fun things about resin kits, you get a sneak peek into the end of the project.

Turnarounds done, the real work starts after the jump. Continue reading »

Jul 252016
 

Time for the first resin figure project of the year. This has been a fairly productive year so far with finishing a number of gunpla project. Time to get at least one figure kit. I picked this kit up at Anime Expo at the Volks booth. They were there last year and back again this year. They even have a location in Torrance, so if I ever need to order something, I believe I can pick it up at their warehouse. Damn cool for folks that have had trouble getting original resin kits. And these are not your run of the mill resin figure kits. These have a high level of quality control. They are engineered using the bandai gunpla model; everything is molded in color. The color separation for these kits are insane. Last year, I grabbed a Revy kit from them and I was sold. You just shake the box and the kit’s done. It’s that friggin simple. Ok, maybe not quite that easy; but if you’ve ever built any other resin anime figure (original or recast) try these Volks kits. For anyone interested in trying their first resin anime figure kit; get a kit from Volks. The comparison is akin to building a macross kit from hasegawa to building any bandai gunpla kit released in the last 5 years.

Last week, we had our July build gathering and the goal for the day was to get her semi cleaned up and pinned together. Like most other Volks kits, she has some options. She comes with two sets of right arms to hold up a sign or her jacket. Pinned together, I have her holding the jacket. Again, the pictures below show the kit as is out of the box, pinned together. The color separation and engineering is amazing.

Continue reading »

Jan 122015
 

While updating my Completed Figures Page, I noticed that there was a missing figure, the Morrigan that I finished in 2012. I searched my site and didn’t find it and remembered that I had rushed to finish it for Orangecon in 2012 and was planning on taking completed pictures. We see how well that plan turned out. So since the photobooth is still set up from the Yukari shoot, I dusted off Morrigan and snapped a few quick pictures. Instead of bats, I used my personal logo, and it didn’t turn out as great as I was expecting. There is plenty of evidence of a rush job, but nothing I can do now – unless I strip it and start from scratch. It’s easier to move on to the next project.

Full gallery after the jump.

Continue reading »

Dec 222014
 

Work continued on Yukari with a sewing machine.

Returning shorly to the previous post, the leg parts were cut to remove the shoes as well as the upper thigh. Instead of painting on the leggings, I decided to sew some nylon mesh material together and effectively have real stockings on the kit. The mesh materials is measured against the painted legs and cut into strips. The mesh is then held together by some pins and sewn together using an elastic stitch. The excess material next to the open end of the stitch is cut away. This end of the stitch needs to be hidden, so the mesh tube is flipped inside out so the excess is on the inside. Once flipped, the mesh tube is slipped over the legs. Cutting away the upper thigh and the shoes makes it easier to put the stockings together, since the upper and lower areas do not need to be carefully cut and glued.

yukari_feet_mod yukari_leggings

Once the legging are in place, the shoes and upper thigh pieces are glued together and the lower torso and legs are done.

Continue reading »

Dec 102014
 

The year is almost over and I’ve yet to get one figure kit completed. So I rummaged through the collection of resin kits and found this partially pinned kit. The parts breakdown is pretty simple and should be a pretty quick build. So I started up the project a few weeks ago.

This is Yukari Yakumo from the doujin game Touhou Project. I have no idea what the game is about or who this character is, but a few years ago, the kit looked pretty good from one of the WF events in Japan and I picked this kit up off Y!J Auctions.

The first step is to finish pinning together the kit, so I can get a better idea on modifications areas, but for the most part, I am just building this out of the bag.

yukari_pin

Continue reading »